Guideline For Transferring Heat Transfer Motifs Onto Garments using a Household Iron1. Carefully remove the white backing. 2. Position the clear plastic sheet with the design onto fabric. 3. Place Teflon sheet (or a T-shirt) over design. 4. Set your iron
to "Wool" setting, "Steam" off. 5. Leave iron on design for approximately 20-25 seconds, no pressure. Do not move iron. Depending on fabric, use less time for silks and more time for denim. For large designs, heat one section at a time. 6. Allow to cool for at least 3-5 minutes, slowly remove the clear plastic sheet. 7. If some crystals/studs are not firmly attached or feel loose, reapply the iron as stated above. 8. You can find training videos on youtube. |
